燃氣器具調壓器檢測

燃氣器具調壓器檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 30597-2014燃氣燃燒器和燃燒器具用安全和控制裝置通用要求

本標準規定了使用GB/T 13611規定的城鎮燃氣的燃氣燃燒器和燃燒器具用安全和控制裝置及其組件(以下簡稱“控制裝置”)的術語和定義、分類和分組、結構和材料、要求、試驗方法、標識、安裝和操作說明書、包裝、運輸和貯存。本標準適用于以下控制裝置:--自動和半自動閥;--燃燒控制裝置;--熄火保護裝置;--燃氣和空氣比例調節裝置;--壓力調節裝置;--旋塞閥總成;--溫度控制裝置;--多功能控制裝置;--壓力傳感裝置;--閥門檢驗系統。

GB 35848-2018商用燃氣燃燒器具

本標準規定了商用燃氣燃燒器具(以下簡稱燃具)的術語和定義，分類和型號，要求，試驗方法，檢驗規則，標志、警示和說明書，包裝、運輸和貯存。本標準適用于以符合GB/T 13611規定的燃氣為能源，燃燒用空氣取自室內、燃燒產物直接或間接排向室外的燃具，包括：a)　額定熱負荷不大于80 kW、蒸汽壓力不大于80 kPa，且設計正常水位水容積小于30 L的蒸汽發生器類燃具；b)　額定熱負荷不大于80 kW、蒸腔蒸汽壓力不大于500 Pa的蒸箱類燃具；c)　額定熱負荷不大于50 kW、腔體內壓力不大于80 kPa的炸爐類燃具；d)　額定熱負荷不大于50 kW的煮食爐類燃具；e)　額定熱負荷不大于80 kW、鍋口有效直徑不小于600 mm的大鍋灶類燃具；f)　額定熱負荷不大于10 kW的煲仔爐，額定熱負荷不大于50 kW的矮湯爐等平頭爐類燃具；g)　額定熱負荷不大于100 kW的常壓固定式沸水器類燃具；h)　燜飯量大于等于6L的飯鍋類燃具；i)　額定熱負荷不大于50 kW的洗碗機類燃具；j)　額定熱負荷不大于60 kW的炒灶類燃具；k)　額定熱負荷不大于50 kW的燒烤爐類燃具；l)　額定熱負荷不大于35 kW的熱板爐類燃具；m)　額定熱負荷不大于80 kW的烤箱類燃具；n)　以上產品的組合體。

GB/T 36699-2018鍋爐用液體和氣體燃料燃燒器技術條件

本標準規定了鍋爐用液體和氣體燃料燃燒器的分類與型號編制、組成與基本配置、基本要求、性能要求、設計與制造、檢驗、試驗與檢測、技術文件與標識、包裝、運輸和貯存、安裝、調試與使用等方面的技術要求。本標準適用于鍋爐用液體和氣體燃料的強制鼓風燃燒器和自然通風燃燒器。電站鍋爐啟動燃燒器、各類工業窯爐與工業加熱爐及其他用途燃燒器可參照本標準執行。

GB/T 50811-2012燃氣系統運行安全評價標準

本規范適用于已正式投產運行的面向居民、商業、工業企業、汽車等領域燃氣系統的現狀安全評價。本標準不適用于燃氣的生產、城市門站以前的天然氣管道輸送，以及沼氣、秸稈氣的生產和使用。

GB/T 50851-2013建設工程人工材料設備機械數據標準

本標準適用于編制建設工程計價依據及收集、整理、分析、上報、發布建設工程工料機價格信息。

CJ/T 29-2019燃氣沸水器

本標準規定了以符合GB/T 13611的城鎮燃氣為燃料的常壓固定式燃氣沸水器的分類和型號，結構和材料，性能要求，試驗方法，檢驗規則，標志、警示和使用說明書，以及包裝、運輸和貯存。本標準適用于制備飲用水的，額定熱負荷不大于100 kW的室內常壓固定式非冷凝式燃氣沸水器(以下簡稱“沸水器”)。

CJ/T 30-2013熱電式燃具熄火保護裝置

本標準規定了熱電式燃具熄火保護裝置(以下簡稱“熄火保護裝置”)的術語和定義、分類、結構和材料、要求、試驗方法、檢驗規則、標識、安裝和操作說明書、包裝、運輸和貯存。本標準適用于標明大工作壓力在10 kPa以下,公稱連接尺寸不大于DN50,并使用符合GB/T 13611規定的城鎮燃氣器具上用熱電式燃具熄火保護裝置。本標準也適用于:--由熱電勢驅動的、能被單獨測試的、用于熱電式燃具熄火保護裝置的電磁閥;--火焰?zhèn)鞲杏玫臒犭娕?--使用輔助能的熱電式燃具熄火保護裝置(例如外部提供的電能)。

CJ/T 113-2015燃氣取暖器

本標準規定了燃氣取暖器(以下簡稱取暖器)的術語和定義,分類與型號,結構和材料,要求,試驗方法,檢驗規則,標識和說明書,包裝、運輸和貯存。本標準適用于使用GB/T 13611規定的燃氣的取暖器,包括:a) 額定熱輸入不大于20 kW的家用取暖器;b) 單個燃燒器額定熱輸入不大于120 kW的非家用取暖器。本標準不適用于室外使用的取暖器、冷凝式取暖器、專為工業用途設計的取暖器、在移動的運輸交通工具中使用的取暖器。

CJ/T 132-2014家用燃氣燃燒器具用自吸閥

本標準規定了家用燃氣燃燒器具用自吸閥(以下簡稱自吸閥)的術語和定義、分類和分組、結構和材料、要求、試驗方法、標識、安裝和操作說明書、檢驗規則、包裝、運輸和貯存。本標準適用于大工作壓力不大于10 kPa,公稱尺寸不大于DN32,工作電壓不大于DC 6V,僅以電池驅動的,使用GB/T 13611規定的城鎮燃氣器具用自吸閥。

CJ/T 336-2010冷凝式家用燃氣快速熱水器

本標準規定了加熱生活用水的冷凝式家用燃氣快速熱水器的分類和型號、材料和結構、要求、試驗方法、驗收規則及標志和說明書、包裝、運輸和貯存。本標準適用于除人工煤氣之外符合GB/T 13611規定燃氣、額定熱輸入不大于70kW的強制排氣式冷凝熱水器、強制給排氣式冷凝熱水器和室外型冷凝熱水器。

CJ/T 393-2012家用燃氣器具旋塞閥總成

本標準規定了家用燃氣器具旋塞閥總成（以下簡稱閥總成）的術語和定義，分類，要求，試驗方法，檢驗規則，標識和使用說明，包裝、運輸和貯存。本標準適用于標明大工作壓力在10 kPa以下，公稱尺寸不大于DN25,使用GB/T 13611規定的城鎮燃氣器具上的旋塞閥總成。

CJ/T 398-2012家用燃氣用具電子式燃氣與空氣比例調節裝置

本標準規定了家用燃氣用具電子式燃氣與空氣比例調節裝置的術語和定義、縮略語、結構和材料、要求、試驗方法、檢驗規則、標識、安裝和操作說明書以及包裝、運輸和貯存。本標準適用于大工作壓力在10kPa以下、公稱直徑不大于DN50、使用GB/T 13611規定的城鎮燃氣器具用、閉環控制的能被單獨測試或作為燃氣用具（或燃燒器）部件進行測試的家用燃氣用具電子式燃氣與空氣比例調節裝置。

CJ/T 451-2014商用燃氣燃燒器具通用技術條件

本標準規定了商用燃氣燃燒器具(以下簡稱燃具)的術語和定義,分類,結構和材料,要求,試驗方法,檢驗規則,標識、警示和使用說明書,包裝、運輸和貯存。本標準適用于商用廚房等使用,以符合GB/T 13611規定的燃氣為能源,安裝在室內、燃燒產物機械排至室外的燃燒器具。

DB31/T 1011-2016燃氣用戶設施安全檢查技術要求

本標準規定了術語和定義、基本要求、檢查內容、記錄等內容。本標準適用于居民用戶和供氣壓力＜0.01 MPa的非居民用戶使用的燃氣用戶設施的安全檢查。

EN 30-1-1-2008家用燃氣灶具.第1-1部分:安全性.一般性;包含修改件A1-2010

This European Standard specifies the construction and performance characteristics as well as the requirements and methods of test for the safety and marking of freestanding and built-in domestic cooking appliances burning the combustible gases given in 4.1 according to the categories specified in 4.2, referred to in the text as \"appliances\".This European Standard covers the following types of domestic cooking appliances, as defined in Clause 3, and belonging to the classes defined in 4.3 (see Table 1): independent freestanding hotplates; independent built-in hotplates; independent hotplates and grills; table cookers; freestanding ovens; built-in ovens; freestanding or built-in grills; griddles; freestanding cookers; built-in cookers. Unless specifically excluded hereafter,This European Standard applies to these appliances or their component parts, whether or not the component parts are independent or incorporated into a single appliance, even if the other heating components of the appliance use electrical energy (e. g. combined gas-electric cookers).This European Standard includes requirements covering the electrical safety of equipment incorporated in the appliance that is associated with the use of gas. It does not include requirements covering the electrical safety of electrically-heated component parts or their associated equipment1).This European Standard does not apply to: a) outdoor appliances; b) appliances connected to a combustion products evacuation duct; c) appliances having a pyrolitic gas oven; d) appliances having covered burners which are not in conformity with the constructional requirements of 5.2.8.2.2; e) appliances incorporating flame supervision devices and having an automatic ignition device for which the duration of the ignition attempt is limited by design; f) appliances equipped with a burner that is periodically ignited and extinguished under the control of an automatic on/off device; 1) Refer to the electrical safety rules. g) appliances equipped with an oven and/or with a grill having a fan: 1) either for the supply of combustion air or for the evacuation of the products of combustion; 2) or for the circulation of the products of combustion within the compartments; h) appliances supplied at pressures greater than those defined in 7.; i) appliances having one or more burners that are capable of remote operation (type1 or type 2), unless the burner(s) concerned are thermostatically controlled oven burners of time-controlled ovens that are designed for a delayed start without the user being present; j) appliances incorporating one or more hotplate or grill burners that enable the user to program the cooking cycle, including the start and/or the end of the cycle.This European Standard does not cover the requirements relating to third family gas cylinders, their regulators and their connection.This European Standard only covers type testing.

EN 88-1-2011燃氣器具用壓力調節器和相關安全裝置.入口壓力大為50 kPa及以下的壓力調節器

This European Standard specifies the safety, construction and performance requirements for pressure regulators and pneumatic gas/air ratio pressure regulators (zero pressure regulators are included as a special type of pneumatic gas/air ratio pressure regulator), intended for use with gas burners, gas appliances and similar use, hereafter referred to as `pressure regulators'.This European Standard is applicable to pressure regulators with declared maximum inlet pressures up to and including 50 kPa (500 mbar) of nominal connection sizes up to and including DN 250 for use with one or more fuel gases in accordance with EN 437, pressure regulators which use auxiliary energy, pneumatic gas/air ratio pressure regulators, which function by controlling a gas outlet pressure in response to an air signal pressure, air signal differential pressure, and/or to a furnace pressure signal (zero pressure regulators are included as a special type of pneumatic gas/air ratio pressure regulator), gas/air ratio pressure regulators which change an air outlet pressure in response to a gas signal pressure or a gas signal differential pressure.This European Standard does not cover pressure regulators connected directly to gas distribution network or to a container that maintains a standard distribution pressure, pressure regulators intended for gas appliances to be installed in the open air and exposed to the environment, mechanically linked gas/air ratio controls, electronic gas/air ratio controls (EN 12067-2).

EN 1319-2009凈加熱輸入量不超過70kW的帶有風扇輔助鍋爐的家用空間加熱燃氣強制對流空氣加熱器

This European Standard specifies the requirements and test methods for the safety and efficiency of domestic gas-fired air heaters with a fan to assist the transportation of combustion air and/or combustion products, hereafter referred to as appliances.This European Standard applies to Type B12, B12AS, B12BS, B13, B13AS, B13BS, B14, B14AS, B14BS, B22, B23, B42, B42AS, B42BS, B43, B43AS, B43BS, B44, B44AS, B44BS, B52, B53, C12, C13, C32, C33, C62 and C63 appliances with an input not exceeding 70 kW (net cv basis), intended primarily for use in single unit residential dwellings. Provision of the heated air may be by means of ducting.This standard does not apply to: a) appliances of the condensing type; b) appliances for outdoor installation; c) dual purpose air conditioning appliances (heating and cooling); d) appliances where the air is heated by an intermediate fluid; e) appliances with forced draught package burners or fully premixed burners; f) appliances fitted with a manual means of adjusting the combustion air supply or the evacuation of the combustion products; g) portable or transportable forced convection appliances; h) appliances having multiple heating units with a single draught diverter; i) appliances fitted with more than one flue outlet; j) Type C22, C23, C42, C43, C52 and C53 appliances; k) appliances that are designed for continuous condensation within the flue system under normal operating conditions; l) appliances having combustion products evacuation ducts, POCEDs, that are non-metallic.This standard is applicable to appliances which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals.